PNI Safe House 250LR Gas Sensor

Carbon monoxide and natural gas sensor package and 3/4 inch solenoid valve.

2 in 1 protection:
- Equipped with 2 semiconductor sensors with long life, versatility and high tolerance to extreme environmental conditions and corrosive environments, which operate independently of each other, PNI Safe House Dual Gas 250LR notifies you instantly when it detects hazardous concentrations of CO (carbon monoxide) or natural gas. PNI Safe House Dual Gas 250LR offers the best protection against deadly gases. All in one unit.

The gas detector in the PNI Safe House Dual Gas 250LR package accurately detects carbon monoxide (CO), natural gases such as methane, propane, butane, ethane, LPG and gaseous hydrocarbons such as propylene and butylene.


The PNI Safe House Smart Gas 300 kit consists of a gas detector and a 3/4 inch solenoid valve.

Sound and light alarm:
- When the gas concentration reaches the preset level, the device emits a visual and audible alarm. The red LED will flash frequently accompanied by a continuous sound. If the detector is connected to the solenoid valve, it will send an electrical pulse to it. The solenoid valve will shut off the gas flow.

The alarm sound of at least 85dB reduces the risk of explosion and protects the life and safety of your property and family.

To turn off the audible alarm, unplug the detector or wait until the concentration of the gas that triggered the alarm decreases. After removing the cause that triggered the alarm, you can reopen the gas flow by lifting the red button on the solenoid valve.

Easy installation:
- We recommend that the solenoid valve be installed only by qualified and authorized personnel. The solenoid valve must be installed in the direction of the gas flow, marked on the solenoid valve.

Determine the installation location of the gas detector no more than 1.5 meters from the gas source (stove, for example) and closer to the ceiling or floor depending on the density of the detected gas.

Attach the gas detector to the wall with the included bracket. Power the detector to a 230V power source and the solenoid valve via the plug and play socket.

After 2 minutes of priming the sensors, your alarm device is ready to ensure the peace and security of your home and family.


Specifications:

- Detected gases: CO, natural gas, LPG, coal gas
- Energy consumption: maximum 3W
- Usage conditions: indoor only, humidity ≤ 95%
- Supply voltage: 230
- Output voltage for the solenoid valve: 9-12V
- LEL (Lower Explosive Limit): 7%
- Dimensions / Weight: Sensor: 72 X 33 X 123 mm / 200 g cable length to solenoid valve: 90 cm 230V power cable length: 140 cm Solenoid valve: 65 x 45 x 105 mm / 380 g cable length to sensor: 30 cm
- Sensor priming time: 180 sec.
- Gas solenoid valve features
- Closing mode: Current or manual pulse
- Closing voltage: DC 9 ~ 12 V (Pulse)
- Closing time: less than 1 second
- Connection: 3/4 ´´inner thread
- Maximum pressure: 100 kPa
- Made of: Brass alloy
- Operating temperature: -10 ° C ~ + 60 ° C

The package contains:
- Gas sensor: Yes
- Gas solenoid valve: Yes

Buy your favorite Electricity and domotics models and enjoy home, garden & DIY. You have the right to return within 30 days if you are not satisfied with your purchase of PNI Safe House 250LR Gas Sensor. If you have any doubt in buying PNI Safe House 250LR Gas Sensor, get in contact with our team of professionals in home, garden & DIY via telephone or email.